|
|
Helmet: Sugar Loaf - Polished Steel (M) |
|
|
|
| Artikelnummer: |
IF13500150 |
| Utgivare: |
Epic Armoury
|
| Lagerstatus: |
|
|
|
|
|
|
|
|
|
Your Knight’s Code is one of valor, truth, and courage. You are tasked with defending the innocent and the weak, and today your oath is being tested. Outside of town there has been a bandit attack on a merchant and his family, and it’s up to you to rescue them.
Your squire straps your Sugar Loaf helmet onto your head over the weight of your chainmail coif, and with a prayer to your god you and your small unit strike out onto the road.
Criminals be warned.
DETAILS
Epic Armoury’s Sugar Loaf Helmet is an enclosed helmet inspired by the traditional knight’s armour. Enclosing the entire head and offering maximum protection, this helmet is reinforced with rivets, rolled steel and a curved apex. Ventilation holes and a cotton inlay are added to the helmet to improve airflow and comfort. The eye-slits are wide and slim, increasing protection but impairing visibility.
Secure the Sugar Loaf Helmet by tightening the leather strap beneath the chin, keeping the helmet in place. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.
Available in sizes Medium and Large.
HISTORY
• Evolved from the great helm, and greatly favoured by knights
• Also referred to as a yelmo de Zaragoza
• Usually worn with a mail coif and padded cap underneath
QUALITY
• Made from 1mm/19 gauge thick mild steel
• Rolled edges with no sharp edges
• Straps and fittings made from top-grain leather
• Hand made, welded pieces for maximum durability
• Polished steel finish
This product is handmade and hand-painted and therefore unique. As a result, when compared with similar item numbers, this product can have natural deviations in pattern, colour and shape, which are not considered defects or faults.
MAINTENANCE
Epic Armoury metal works products should be treated with a wax or quality acid-free vegetable oil and kept in dry storage. Metal armour containing leather parts would needs a separate maintenance for the leather. Please read the "Leather Straps and Fittings" section below for leather cleaning and maintenance using leather-care products.
DEGREASING AND PREPARING YOUR ARMOUR FOR USE
When you open your armour, you may be overwhelmed by the smell of grease and oil. The oil has been applied to protect your armour during storage and transport. Use a degreasing product or mineral spirits and a dry cloth or paper towels to remove all the oil from your plate armour parts. Chainmail is a bit harder to remove all the oil from the links, but it can be done in much the same way. Wipe off as much as you can with a dry cloth, and with the remaining oil, you can remove the grease from the chainmail with mineral spirits or another solvent by spraying it on the links. You can also choose to fully submerge your chainmail in a degreasing product and use your hands to agitate the metal in the solution, this will completely remove all oil and grease from your links. After removal of the oil, make sure to dry your armour thoroughly. Strong, warm sunlight is great for drying your armour, but you can also use a hairdryer or a heat gun to speed up the process. Be careful not to overheat any leather parts when using a heat gun.
CLEANING
Moisture is the enemy of armour and chainmail. If your armour does get wet, it is important that you dry it thoroughly as soon as possible. After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality acid-free vegetable oil. Alternatively, you can apply a coating of wax to the entire surface of the exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.
RUST-PREVENTION AND REMOVAL
Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in wax or quality acid-free vegetable oil. Epic Dark products are specially treated to resist rust, but should still be treated with oil and kept in dry storage.
LEATHER STRAPS AND FITTINGS
Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.
You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.
|
|
|
|
|
| |
|
Tillbehör:
|
|
LOGGA IN
BUTIKER
EVENT
KONTAKT
